Home > Lexmark Error > Lexmark Error Message 0502

Lexmark Error Message 0502

Sign in Share More Report Need to report the video? Reply Tommi Campbell says: 2007-09-17 at 2:52 am I cleaned the bar and the clear strip and I am still getting the 0502 message. thanks for the tip. After I wiped the metal bar, the 502 error problem was cured. Check This Out

Reply Jenn says: 2009-09-06 at 12:12 am Thank you so much for the advice. A pit from a plum must have been on top of the printer when I was replacing the ink and feel inside. now i cant get it back in. Love that I keep finding instructions online to keep this beast going and going. - Nitecat Hi MattThanks for your instructions - a bit beyond a Grandma but fortunately my son http://support.lexmark.com/index?productCode=LEXMARK_X5150&segment=SUPPORT&page=content&id=HO2707

I discovered that you can push until you are blue in the face and you will never get the encoder strip to slip in place as per some instructions from the Reply Buster says: 2007-01-20 at 12:19 am Thank you I cleaned the rod and presto all works great Thank you Thank you Reply Stellaroo says: 2007-01-21 at 4:56 pm Ditto. Reply David Barber says: 2008-03-27 at 11:52 pm talk to someone at staples about the error 05502 and he told me to get on the computor and go to this site

This worked great on my Lexmark X6170. So thanks for the advise! Reply justpeachy says: 2007-01-22 at 9:19 pm Wow! i tried everything EVEN tapping it with small hammer..

Is there a way of fixing this, or do I need to look for a new printer? Moral of the story: keep cleaning until your 0502 error goes away! That did the trick. http://support.lexmark.com/index?page=content&id=SO1516&actp=LIST_RECENT Sign in Statistics 5,411 views 0 Like this video?

Apparently, that's what was causing my 0502 error because that last cleaning seemed to do the trick. IT WORK REAL GOOD. says: 2006-03-29 at 10:05 pm hey guys. (if anyone is still here) if any of you took the time time to mess with the encoder strip, how didi you get it They said to just trash the printer when this did the trick!

With a piece of tissue or a small artists brush…very lightly lubricate the steel rod and manually move the cartridge carrier back and forth 3 or 4 times applying a light http://blog.forret.com/2006/02/11/lexmark-printers-with-hardware-error-0502/ Disconnect the power cable from the back of the Lexmark X5100 / X6100 Series. 3. IT IS ONLY A PRINTER. I've been having this problem and it is getting worse each time.

You are basically moving it down, slightly forward, and then let it go back up again. his comment is here Reply frank says: 2009-04-14 at 3:16 pm thanks a million,i tried for hours with checking catridges.claening the rod really worked Reply Bev says: 2009-04-14 at 4:49 pm Had the 0502 error I appreciate your detailed response. turn printer off.2.

James Taylor 713 views 0:26 COMO INSTALAR UN SISTEMA DE TINTA CONTINUA EN HP 4500 - Duration: 6:47. Sangram Rath 14,018 views 2:00 recarga lexmark - Duration: 3:15. It didn't work on the other printer. this contact form Now I can use my printer again!

Even the people on the help line weren't able to help. Yes, my password is: Forgot your password? Close Yeah, keep it Undo Close This video is unavailable.

Reply tushar says: 2008-01-29 at 4:53 pm res.

The error is now gone. I am not sure if it makes any difference at all which way it goes in. Reply John says: 2007-09-26 at 2:52 am I tried cleaning both the rail and the encoder strip and still have the 0502 error. Reply Luis says: 2007-02-13 at 9:43 pm Thank you, Thank you, Thank you, Thank you!!!!

Next, gently press down on the encoder strip with one finger on each side of the carrier. Press the + button 4 times until Self test appears on the LED Display. 3. I started looking more in depth into the problem and noticed that a fishing hook was under something making the cartridges not go all the way across the rod!! navigate here Thank you!!

While it was unplugged I again cleaned the encoder strip with a soft clean cloth. To your right, it's small and faint, but it should read "A-03" going in an upward direction. Many thanks. Thank you!

I thought I was gonna spend a day trying to fix this. I was able to get help from you via a google search. I have a Dell all in one and just recently started experiencing this problem. The first time I found the incredibly involved Lexmark site instructions and was about to throw the machine out.

says: 2007-12-16 at 10:35 pm you have just saved my printer life 😀 I was about to throw it of the window …. It worked perfectly. There is a square hole with a hook facing the outside of the printer which I hooked the hole on the strip through. I placed my right hand through the bottom of the printer where printed pages come out of it.